When Replacing Rotogravure Printing Cylinder, Look For This
May 28, 2023
When Replacing Rotogravure Printing Cylinder, Look For This
If your rotogravure printing cylinder needs some replacement, there are a number of things that you need to consider. One of the things worth considering is the compatibility of the cylinder with your printing machine. This is important, especially if it has taken a while since the last replacement.
How there are many other factors that are worth considering when buying a rotogravure printing cylinder. Here are some of the key factors that investors should consider seriously:
Compatibility
As mentioned above, you need to check the compatibility of the rotogravure printing cylinder. In fact, you need to ensure that the cylinder you are buying is designed to be used by your machine. This is important because there are many types of rotogravure printing cylinders in the market and for the brand you are using, but they might not fit your machine. Therefore, compatibility in terms of size is one of the most important things to consider.
Material Used
There are many types of materials being used today for the manufacturing of rotogravure printing cylinders. However, every material is specific for certain kinds of printing and machines. Therefore, depending on the kind of laser engraving that you are doing, you need to get the right material for it. In most laser engraving, steel and aluminum are some of the most widely used for the construction of rotogravure printing cylinders.
Engraving Layer
Another important factor to consider is the engraving layer. The most widely used engraving layer is copper, but this may vary depending on the kind of engraving. For cylinders that are not engraved directly, a layer of rubber might be used. The bottom line is that it should be the same as the old cylinder that you are replacing.
Weight
You should not forget to check the weight of the rotogravure printing cylinder. This is one of the things that you need to consider because it will affect the performance of the machine. Make sure the accurate weight of the cylinder has been established.
For more about rotogravure printing cylinders and new cylinders, check out laserengravingmanufacturers. They have a range of laser engraving products for the market.